Mining Incidents

Gorham Sand & Gravel C619: 31 MSHA citations Metal/Non-Metal

Pike Industries Inc · Surface
Controlled by CRH PLC
GORHAM, Coos County, NH  ·  Active
MSHA Mine ID: 2700061

Gorham Sand & Gravel C619 has $5K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Gorham Sand & Gravel C619.

Fatalities
0
Total incidents
13
Years on record
1984–2019
Latest incident
Mar 2019
Compliance record
MSHA citations since 2001
31
citations
5
significant & substantial
$4,681
proposed penalties
$4,681
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
41
inspections on record
523
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 523 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Gorham Sand & Gravel C619 has $5K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
30 assessments are final orders; 1 contested dockets.
Of $212 in penalties contested before the Commission, $100 was upheld in final decisions.
As of the most recent assessment on 2025-08-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.7%
significant & substantial
0.0%
high negligence or reckless
16.7%
reasonably likely or greater
50.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 33.3% low, 66.7% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 6% of citations on record
  • Settled 1 · 50%
  • Vacated or withdrawn 1 · 50%
53%
Penalty reduction in decided contests
$212 proposed, $100 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2010-11-16.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2011-29M Settlement Koutras 2011 $212 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2021-09-21, 4 years ago
0%
of limit-tested samples over the exposure limit
8
samples
5
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz5
  • Respirable dust, <.1mg2
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (8)
Date Contaminant Concentration Limit Conc / limit Occupation
2021-09-21 Respirable dust, <.1mg 0 Crusher Oper/Worker
2021-09-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-07-07 Unlisted Particulate, respirable, <1% Qtz 0.19 Front-end Loader Operator
2009-09-02 Quartz, respirable, >1% Qtz 0.24 1.24 0.19 Truck Driver
2009-09-02 Quartz, respirable, >1% Qtz 0.32 0.68 0.47 Laborer, Bullgang
2001-06-21 Quartz, respirable, >1% Qtz 0.31 0.56 0.55 Truck Driver
2001-06-21 Quartz, respirable, >1% Qtz 1.25 2.1 0.60 Crusher Oper/Worker
2001-06-21 Quartz, respirable, >1% Qtz 0.24 0.67 0.36 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Gorham Sand & Gravel Inc 1950 to 1986
  2. Gorham Sand & Gravel 1986 to 1996
  3. Pike Industries Inc 1997 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 2
2025 3
2024 2
2023 3
2022 3
2021 3
2020 3
2019 3
2018 3
2017 2
2016 4
2015 7
2014 6
2013 9
2012 8
2011 8
2010 8
2009 7
2008 8
2007 7
2006 6
2005 4
2004 5
2003 5
2002 8
2001 8
2000 9
Source: MSHA quarterly employment and production, updated weekly.

Gorham Sand & Gravel C619 sits in Coos County, New Hampshire, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Coos County, New Hampshire · Population 31,386
0.0%
Mining share of county employment
$58,439
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 527 0 0 0.0
2026 Q1 573 0 0 0.0
2025 Q4 650 0 0 0.0
2025 Q3 1,419 1 0 704.7
2025 Q2 1,325 0 0 0.0
2025 Q1 616 0 0 0.0
2024 Q4 742 0 0 0.0
2024 Q3 1,107 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 1,210 0 0 0.0
2024 Q1 391 0 0 0.0
2023 Q4 780 0 0 0.0
2023 Q3 1,104 0 0 0.0
2023 Q2 989 0 0 0.0
2023 Q1 405 0 0 0.0
2022 Q4 753 0 0 0.0
2022 Q3 950 0 0 0.0
2022 Q2 1,323 0 0 0.0
2022 Q1 407 0 0 0.0
2021 Q4 743 0 0 0.0
2021 Q3 767 0 0 0.0
2021 Q2 1,160 0 0 0.0
2021 Q1 528 0 0 0.0
2020 Q4 785 0 0 0.0
2020 Q3 790 0 0 0.0
2020 Q2 821 0 0 0.0
2020 Q1 641 0 0 0.0
2019 Q4 660 2 0 3030.3
2019 Q3 834 0 0 0.0
2019 Q2 1,188 0 0 0.0
2019 Q1 998 0 0 0.0
2018 Q4 1,380 2 0 1449.3
2018 Q3 810 0 0 0.0
2018 Q2 507 0 0 0.0
2018 Q1 270 0 0 0.0
2017 Q4 200 0 0 0.0
2017 Q3 312 1 0 3205.1
2017 Q2 306 0 0 0.0
2017 Q1 285 0 0 0.0
2016 Q4 294 0 0 0.0
2016 Q3 348 0 0 0.0
2016 Q2 416 0 0 0.0
2016 Q1 1,552 1 0 644.3
2015 Q4 2,699 0 0 0.0
2015 Q3 2,135 1 1 468.4
2015 Q2 1,948 0 0 0.0
2015 Q1 1,545 0 0 0.0
2014 Q4 2,216 0 0 0.0
2014 Q3 1,856 1 1 538.8
2014 Q2 1,598 0 0 0.0
2014 Q1 1,451 1 0 689.2
2013 Q4 2,793 0 0 0.0
2013 Q3 3,276 0 0 0.0
2013 Q2 4,870 0 0 0.0
2013 Q1 1,699 0 0 0.0
2012 Q4 3,656 0 0 0.0
2012 Q3 3,872 1 0 258.3
2012 Q2 3,773 0 0 0.0
2012 Q1 879 0 0 0.0
2011 Q4 2,587 0 0 0.0
2011 Q3 3,295 2 0 607.0
2011 Q2 3,406 0 0 0.0
2011 Q1 711 0 0 0.0
2010 Q4 3,372 0 0 0.0
2010 Q3 4,572 1 1 218.7
2010 Q2 4,418 0 0 0.0
2010 Q1 1,042 0 0 0.0
2009 Q4 3,333 0 0 0.0
2009 Q3 5,002 0 0 0.0
2009 Q2 4,685 0 0 0.0
2009 Q1 1,094 0 0 0.0
2008 Q4 2,744 0 0 0.0
2008 Q3 4,726 0 0 0.0
2008 Q2 4,175 0 0 0.0
2008 Q1 937 0 0 0.0
2007 Q4 2,483 0 0 0.0
2007 Q3 4,516 0 0 0.0
2007 Q2 4,158 0 0 0.0
2007 Q1 1,032 0 0 0.0
2006 Q4 3,300 0 0 0.0
2006 Q3 4,107 0 0 0.0
2006 Q2 3,445 0 0 0.0
2006 Q1 1,074 0 0 0.0
2005 Q4 2,326 0 0 0.0
2005 Q3 3,985 0 0 0.0
2005 Q2 3,880 2 0 515.5
2005 Q1 890 0 0 0.0
2004 Q4 3,119 0 0 0.0
2004 Q3 4,751 0 0 0.0
2004 Q2 3,627 0 0 0.0
2004 Q1 1,428 0 0 0.0
2003 Q4 3,301 0 0 0.0
2003 Q3 4,590 0 0 0.0
2003 Q2 3,707 0 0 0.0
2003 Q1 1,340 0 0 0.0
2002 Q4 3,197 0 0 0.0
2002 Q3 2,418 1 0 413.6
2002 Q2 6,080 2 0 328.9
2002 Q1 1,012 0 0 0.0
2001 Q4 2,695 0 0 0.0
2001 Q3 4,682 0 0 0.0
2001 Q2 4,761 1 0 210.0
2001 Q1 4,008 0 0 0.0
2000 Q4 2,827 0 0 0.0
2000 Q3 3,921 0 0 0.0
2000 Q2 4,558 0 0 0.0
2000 Q1 1,347 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

13 on file

2019 · 1 incident

March 19, 2019 NH · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Pike Industries Inc · Struck by falling object

Employee was working in shop cutting 3" angle iron piece. Employee was sliding the unused piece back onto rack when the piece of steel fell from the roller onto employee's foot. Employee received two fractured bones in foot.

2008 · 1 incident

November 18, 2008 NH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pike Industries Inc · Struck by... (Not Elsewhere Classified)

Employee was changing cutting edge on loader, with assistance of a co-worker, he was removing the bolts. The employee had a hammer on bottom side of cutting edge holding the bolt up, the co-worker had an impact wrench on top to remove nut. When the co-worker pushed down on wrench, the hammer slipped. When hammer moved, employee's finger came in contact with the spinning bolt.

2001 · 1 incident

August 8, 2001 NH · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Pike Industries Inc · (Not Elsewhere Classified)

WHILE RESTING BETWEEN USING EXCAVATOR MACHINE, EMPLOYEE WAS WALKING AND OBSERVING A NEWLY DUG TEST HOLE AND COLLAPSED.

2000 · 1 incident

September 19, 2000 NH · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Pike Industries Inc · Struck by... (Not Elsewhere Classified)

WHILE USING CRANE TO FIX WASH PLANT ON CRUSHER THE CRANE SLING GOT CAUGHT BETWEEN 2 PIECES OF SAND SCREW & CAME LOOSE HITTING HIS HAND

1996 · 2 incidents

October 2, 1996 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Gorham Sand & Gravel · Over-exertion in lifting objects

WHILE CHANGING TIRES ON TRUCK, HE PULLED MUSCLE IN RIGHT SHOULDER AND BACK.

July 16, 1996 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Gorham Sand & Gravel · Over-exertion (Not Elsewhere Classified)

WHILE GETTING INTO THE TRUCK HE SLIPPED ON STAIRS AND CAUGHT HIMSELF WITH HIS RIGHT ARM. HE PULLED THE MUSCLES IN RIGHT SHOULDER.

1993 · 2 incidents

September 29, 1993 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Gorham Sand & Gravel · Over-exertion (Not Elsewhere Classified)

TWISTED RIGHT KNEE WHILE GETTING OUT OF THE LOADER. CAUGHT FOOT ON FRAME UNDER THE DOOR.

June 9, 1993 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Gorham Sand & Gravel · Over-exertion (Not Elsewhere Classified)

WHILE CHANGING A TIRE ON HIS TRUCK, THE TIRE SLIPPED AND WHEN HE WENT TO GRAB IT, HE TWISTED HIS LEFT KNEE.

1992 · 1 incident

August 17, 1992 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Gorham Sand & Gravel · Over-exertion (Not Elsewhere Classified)

85061S GETTING OUT OF THE TRUCK TO ROLL THE CANVAS AND HE SLIPPED ON THE FUEL TANK. HE CAUGHT HIMSELF, BUT PULLED MUSCLE IN HIS NECK AND BACK.

1989 · 1 incident

January 12, 1989 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Gorham Sand & Gravel · Struck by flying object

INSTALLING STEERING ARM ON NEW STEERING BOX.PUT CHISEL BETWEEN EARS TO WEDGE IT INTO PLACE AND WHEN HIT ARM TO TRY TO MAKE IT GO IN PLACE CHISEL FLEW,HIT IN FACE.CUT AND BRUISED RIGHT SIDE OF

1988 · 1 incident

June 23, 1988 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Gorham Sand & Gravel · Caught in, under or between (Not Elsewhere Classified)

WAS WORKING ON POWER TAKE-OFF ON TRUCK #3 AND CAUGHT TWO RIGHT HAND FINGERS ON SPINNING UNIVERSAL JOINT.HAD TO HAVE SITCHES ON FINGERS.

1987 · 1 incident

January 22, 1987 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Gorham Sand & Gravel · Over-exertion in lifting objects

HE WAS LIFTING 2N MACK TRUCK, 3, SPRING AND STRAINED HIS LOWER BACK.

1984 · 1 incident

January 9, 1984 NH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Gorham Sand & Gravel Inc · Struck by... (Not Elsewhere Classified)

WHILE DRILLING OUT A WHEEL LUG. THE 3/4" DRIVE HAND DRILL SPUN AND HIT HIS RIGHT LEG BRUISED RIGHT LEG