Mining Incidents

Lanes Branch Surface Mine: 30 MSHA citations Coal

Controlled by Jon Nix
Brenton, Wyoming County, WV  ·  NonProducing
MSHA Mine ID: 4609363

Lanes Branch Surface Mine has $6K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Lanes Branch Surface Mine.

Fatalities
0
Total incidents
1
Years on record
2012
Latest incident
Jun 2012
Compliance record
MSHA citations since 2010
30
citations
22
significant & substantial
$6,095
proposed penalties
$6,095
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
20
inspections on record
261
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 261 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Lanes Branch Surface Mine has $6K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
29 assessments are final orders; 1 contested dockets.
Of $638 in penalties contested before the Commission, $638 was upheld in final decisions.
As of the most recent assessment on 2013-11-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
75.9%
significant & substantial
3.4%
high negligence or reckless
75.9%
reasonably likely or greater
31.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 27.6% low, 69.0% moderate, 3.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
6 citations taken to the federal commission · 20% of citations on record
  • Stood as issued 6 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 4 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$638 proposed, $638 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2012-05-07.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEVA 2012-1133 Dismissal Lesnick 2013 $638 → $638
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

MSHA sampling at Lanes Branch Surface Mine shows 100% of 20 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2013-11-04, 12 years ago
100%
within 1.5 mg/m3
20
samples
0.38
dust max (mg/m3)
20 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR5
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE5
  • AUGER OPERATOR3

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2013-11-04, 12 years ago
13%
over PEL
15
samples
Most-sampled occupations
  • BULLDOZER OPERATOR4
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
  • AUGER HELPER2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2013 100% 10
2012 100% 10
Noise by year
Year over PEL samples
2013 20% 10
2012 0% 5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Ownership history
  1. Prime Coal, LLC 2009 to 2010
  2. Rolling S Augering, LLC 2010 to 2011
  3. Tim Marcum & Sons, Inc. 2011 to 2013
  4. Hanover Resources LLC 2013 to 2014
  5. Rolling S Augering, LLC 2014 to 2025
  6. Active Resources, Inc 2025 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2026 15 5,426
2025 0
2019 1
2013 8 17,300
2012 10 29,569
2011 6 7,257
2010 0
Source: MSHA quarterly employment and production, updated weekly.

Lanes Branch Surface Mine sits in Wyoming County, West Virginia, where the Census mining category is 11.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Wyoming County, West Virginia · Population 20,948
11.2%
Mining share of county employment
$48,038
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 9,370 0 0 0.0
2026 Q1 1,488 0 0 0.0
2025 Q4 0 0 0
2019 Q4 1 0 0 0.0
2013 Q4 2,040 5 3 2451.0
2013 Q3 4,132 1 1 242.0
2013 Q2 1,605 0 0 0.0
2012 Q4 0 0 0
Show 10 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2012 Q3 2,093 5 4 2388.9
2012 Q2 8,091 7 5 865.2
2012 Q1 7,800 6 4 769.2
2011 Q4 5,405 1 1 185.0
2011 Q3 1,566 0 0 0.0
2011 Q2 552 0 0 0.0
2011 Q1 0 0 0
2010 Q4 0 0 0
2010 Q3 0 1 0
2010 Q2 0 1 1
No fatalities recorded at this mine.

Reportable incidents

1 on file

2012 · 1 incident

June 9, 2012 WV · Coal rock driller SLIP OR FALL OF PERSON
Tim Marcum & Sons, Inc. · Fall from machine

EE was operating the drill & he went to step out of the cab to check on his drill depth. He lost his footing & fell from the drill deck approximately 6 feet. He fell on his right shoulder & right side of his face.