Mining Incidents

Ramaco Resources, LLC: 1 recorded fatality operator

Controlled by Ramaco Resources Inc
MSHA operator ID: 0122932

Ramaco Resources, LLC has had 1 fatality among 317 reportable incidents since 2014. MSHA has proposed $8.3M in penalties since 2013, with $1.9M outstanding.

Watch this operator

Email me when a new MSHA incident is filed at any Ramaco Resources, LLC mine.

Fatalities
1
Total incidents
317
Mines on record
15
Years on record
2014–2026
Compliance record
MSHA citations since 2013
8,822
citations
1,710
significant & substantial
$8,349,292
proposed penalties
$4,997,018
paid to date
60% of proposed penalties paid to date, a $3,352,274 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2012
1,393
inspections on record
61,977
inspection hours
14.2
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
8,822 citations across 61,977 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$8.3M
proposed penalties
$6.9M
current assessed
$5.0M
paid to date
$1.9M
outstanding
8,044 assessments are final orders; 284 contested dockets.
Of $3.5M in penalties contested before the Commission, $2.0M was upheld in final decisions.
As of the most recent assessment on 2026-08-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
19.9%
significant & substantial
2.9%
high negligence or reckless
20.1%
reasonably likely or greater
28.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.1% none, 46.7% low, 50.3% moderate, 2.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.
3.92
total case rate
2.75
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.19 and the all-US-mining average was 1.98 cases per 100 workers.
Year total case rate days-away fatal
2026 3.29 1.85 0.000
2025 3.92 2.75 0.000
2024 4.51 2.97 0.000
2023 2.41 1.81 0.000
2022 3.39 2.68 0.000
2021 2.93 2.10 0.000
2020 4.67 2.95 0.000
2019 4.71 1.18 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2026-09-25
99%
within 1.5 mg/m3
25,479
samples
3.81
dust max (mg/m3)
58
over MSHA ECV
ⓘ The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
3,560 samples taken by MSHA inspectors, 21,919 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR7,761
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)6,384
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)6,029

Silica (quartz)

Last sampled: 2026-09-24
5.5
silica avg (%)
1,386
samples
38.3
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR460
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)406
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)344

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2026-09-28
5%
over PEL
1,074
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)227
  • CONTINUOUS MINER OPERATOR166
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)139
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1,681 citations taken to the federal commission · 19% of citations on record
  • Settled 1,499 · 89%
  • Stood as issued 8 · 0%
  • Still open 174 · 10%
77%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 784 decided S&S contests · industry: 79%
42%
Penalty reduction in decided contests
$3.4M proposed, $2.0M after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2026-09-10. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEVA 2025-0311 Settlement Paez 2026 $139K → $47K
WEVA 2025-0395 Settlement Paez 2025 $119K → $73K
WEVA 2025-0313 Settlement Paez 2025 $99K → $62K
WEVA 2025-0081 Settlement Paez 2025 $96K → $58K
WEVA 2025-0190 Settlement Paez 2025 $92K → $61K
WEVA 2023-0263 Settlement Paez 2025 $86K → $30K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2026
21
2025
50
2024
58
2023
25
2022
39 (1f)
2021
25
2020
32
2019
29
2018
28
2017
8
2014
2

Mines on record

Fatalities under this operator

1 recorded
February 28, 2022 WV · Coal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler Fatality · MACHINERY
Ramaco Resources, LLC · Caught in, under or between running or meshing objects

Employee was attempting to move the face drill and got pinched between the machine and the rib causing injury.

For insurers, brokers, and safety consultants

Where Ramaco Resources, LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us