Mining Incidents

Belgrade Pit: 141 MSHA citations Metal/Non-Metal

Knife River · Surface
Controlled by Knife River Corporation
Belgrade, Gallatin County, MT  ·  Active
MSHA Mine ID: 2400462

Belgrade Pit has $27K in proposed MSHA penalties and $316 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Belgrade Pit.

Fatalities
0
Total incidents
7
Years on record
1993–2014
Latest incident
Jan 2014
Compliance record
MSHA citations since 2000
141
citations
20
significant & substantial
$27,037
proposed penalties
$26,608
paid to date
98% of proposed penalties paid to date, a $429 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
65
inspections on record
961
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 961 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Belgrade Pit has $27K in proposed MSHA penalties and $316 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$27K
proposed penalties
$27K
current assessed
$27K
paid to date
$316
outstanding
138 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-06-16.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
14.3%
significant & substantial
4.3%
high negligence or reckless
15.0%
reasonably likely or greater
36.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 12.1% low, 83.6% moderate, 4.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-06-17
8%
of limit-tested samples over the exposure limit
29
samples
13
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz171 over
  • Respirable dust, <.1mg10
  • Fibers, >5um1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (29)
Date Contaminant Concentration Limit Conc / limit Occupation
2023-08-17 Quartz, respirable, >1% Qtz 1.06 0.78 1.36 Crusher Oper/Worker
2026-06-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-06-17 Quartz, respirable, >1% Qtz 0.17 0.78 0.22 Laborer, Bullgang
2026-06-17 Quartz, respirable, >1% Qtz 0.14 0.86 0.16 Laborer, Bullgang
2025-07-16 Respirable dust, <.1mg 0 Washer Operator
2025-07-16 Quartz, respirable, >1% Qtz 0.3 0.88 0.34 Bobcat Operator
2025-07-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2024-07-30 Quartz, respirable, >1% Qtz 0.53 0.87 0.61 Crusher Oper/Worker
2024-07-30 Respirable dust, <.1mg 0 Front-end Loader Operator
2024-07-30 Quartz, respirable, >1% Qtz 2.26 Crusher Oper/Worker
2023-09-20 Quartz, respirable, >1% Qtz 0.5 Crusher Oper/Worker
2023-08-17 Quartz, respirable, >1% Qtz 0.27 0.83 0.33 Front-end Loader Operator
2023-08-17 Quartz, respirable, >1% Qtz 0.32 0.78 0.41 Crusher Oper/Worker
2019-01-16 Quartz, respirable, >1% Qtz 0.16 Crusher Oper/Worker
2019-01-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-01-16 Quartz, respirable, >1% Qtz 0.33 0.92 0.36 Laborer, Bullgang
2019-01-16 Respirable dust, <.1mg 0 Supervisor, Co. Official
2019-01-16 Quartz, respirable, >1% Qtz 0.22 Laborer, Bullgang
2012-03-27 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-06-09 Fibers, >5um 0 Crusher Oper/Worker
2004-03-18 Quartz, respirable, >1% Qtz 0.36 0.65 0.55 Cleanup Man
2004-03-18 Quartz, respirable, >1% Qtz 0.41 1.09 0.38 Mechanic
2004-03-18 Quartz, respirable, >1% Qtz 0.19 0.57 0.33 Mechanic
2003-03-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-03-18 Quartz, respirable, >1% Qtz 0.31 0.83 0.37 Cleanup Man
2003-03-18 Quartz, respirable, >1% Qtz 1.1 1.21 0.91 Crusher Oper/Worker
2002-05-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-05-15 Respirable dust, <.1mg 0 Crusher Oper/Worker
2002-05-15 Unlisted Particulate, respirable, <1% Qtz 0.13 Front-end Loader Operator

Area samples (mill and shop air)

Last sampled: 2014-10-09, 11 years ago
2
samples
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Area sampled
2014-10-09 Respirable dust, <.1mg 0 SF ORE TRANSFER
2014-10-09 Respirable dust, <.1mg 0 SF ORE PROCESSING
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Belgrade Pit recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Montana, metal and nonmetal mining averaged 2.69 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Pioneer Ready Mix 1950 to 1990
  2. Jtl Group Inc 1990 to 2002
  3. Knife River 2002 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 15
2025 20
2024 17
2023 15
2022 13
2021 13
2020 15
2019 12
2018 13
2017 12
2016 12
2015 14
2014 13
2013 13
2012 12
2011 14
2010 11
2009 11
2008 12
2007 15
2006 16
2005 13
2004 13
2003 12
2002 11
2001 6
2000 5
Source: MSHA quarterly employment and production, updated weekly.

Belgrade Pit sits in Gallatin County, Montana, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Gallatin County, Montana · Population 122,194
0.3%
Mining share of county employment
$87,454
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 9,701 2 0 206.2
2026 Q1 7,597 0 0 0.0
2025 Q4 10,332 2 0 193.6
2025 Q3 14,823 2 0 134.9
2025 Q2 12,754 0 0 0.0
2025 Q1 7,248 1 1 138.0
2024 Q4 10,086 0 0 0.0
2024 Q3 12,163 7 0 575.5
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 9,600 0 0 0.0
2024 Q1 9,083 5 0 550.5
2023 Q4 9,202 0 0 0.0
2023 Q3 9,082 4 1 440.4
2023 Q2 8,455 0 0 0.0
2023 Q1 7,371 0 0 0.0
2022 Q4 5,515 0 0 0.0
2022 Q3 8,790 0 0 0.0
2022 Q2 7,963 3 0 376.7
2022 Q1 5,624 4 0 711.2
2021 Q4 6,169 0 0 0.0
2021 Q3 6,435 2 0 310.8
2021 Q2 6,925 0 0 0.0
2021 Q1 5,626 9 1 1599.7
2020 Q4 6,511 0 0 0.0
2020 Q3 8,775 0 0 0.0
2020 Q2 9,148 0 0 0.0
2020 Q1 7,086 0 0 0.0
2019 Q4 6,622 2 0 302.0
2019 Q3 8,368 4 1 478.0
2019 Q2 7,483 0 0 0.0
2019 Q1 3,792 6 0 1582.3
2018 Q4 7,572 0 0 0.0
2018 Q3 7,601 4 0 526.2
2018 Q2 7,773 0 0 0.0
2018 Q1 1,857 3 0 1615.5
2017 Q4 5,808 0 0 0.0
2017 Q3 6,082 0 0 0.0
2017 Q2 6,315 6 1 950.1
2017 Q1 4,271 4 1 936.5
2016 Q4 4,822 0 0 0.0
2016 Q3 5,042 3 1 595.0
2016 Q2 5,873 0 0 0.0
2016 Q1 4,034 0 0 0.0
2015 Q4 5,778 3 0 519.2
2015 Q3 6,735 0 0 0.0
2015 Q2 6,501 4 1 615.3
2015 Q1 4,533 0 0 0.0
2014 Q4 4,846 2 0 412.7
2014 Q3 5,922 2 0 337.7
2014 Q2 5,125 0 0 0.0
2014 Q1 3,595 0 0 0.0
2013 Q4 4,641 1 0 215.5
2013 Q3 5,521 0 0 0.0
2013 Q2 5,395 1 0 185.4
2013 Q1 2,922 0 0 0.0
2012 Q4 3,871 0 0 0.0
2012 Q3 5,066 0 0 0.0
2012 Q2 4,429 0 0 0.0
2012 Q1 632 9 2 14240.5
2011 Q4 3,163 0 0 0.0
2011 Q3 5,859 0 0 0.0
2011 Q2 5,439 0 0 0.0
2011 Q1 1,044 2 0 1915.7
2010 Q4 3,210 0 0 0.0
2010 Q3 4,313 0 0 0.0
2010 Q2 4,534 9 3 1985.0
2010 Q1 1,137 0 0 0.0
2009 Q4 3,060 0 0 0.0
2009 Q3 5,270 0 0 0.0
2009 Q2 3,227 1 0 309.9
2009 Q1 1,603 0 0 0.0
2008 Q4 2,905 0 0 0.0
2008 Q3 5,722 2 0 349.5
2008 Q2 8,181 0 0 0.0
2008 Q1 2,970 1 0 336.7
2007 Q4 4,140 0 0 0.0
2007 Q3 18,568 0 0 0.0
2007 Q2 7,943 0 0 0.0
2007 Q1 5,575 2 0 358.7
2006 Q4 6,630 0 0 0.0
2006 Q3 7,489 2 1 267.1
2006 Q2 12,385 3 1 242.2
2006 Q1 5,226 3 0 574.1
2005 Q4 6,437 0 0 0.0
2005 Q3 5,145 0 0 0.0
2005 Q2 8,369 0 0 0.0
2005 Q1 5,837 0 0 0.0
2004 Q4 6,884 0 0 0.0
2004 Q3 9,029 4 1 443.0
2004 Q2 7,868 0 0 0.0
2004 Q1 3,822 1 0 261.6
2003 Q4 5,789 0 0 0.0
2003 Q3 8,565 3 0 350.3
2003 Q2 3,724 0 0 0.0
2003 Q1 5,531 0 0 0.0
2002 Q4 6,265 0 0 0.0
2002 Q3 8,596 0 0 0.0
2002 Q2 5,928 0 0 0.0
2002 Q1 2,357 0 0 0.0
2001 Q4 2,574 2 0 777.0
2001 Q3 2,316 0 0 0.0
2001 Q2 3,958 0 0 0.0
2001 Q1 1,290 0 0 0.0
2000 Q4 2,182 8 2 3666.4
2000 Q3 1,088 0 0 0.0
2000 Q2 2,751 0 0 0.0
2000 Q1 1,019 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

7 on file

2014 · 1 incident

January 22, 2014 MT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Knife River · Over-exertion (Not Elsewhere Classified)

Was walking across yard slipped on snow covered ice. He had a quad tendon rupture in his left knee.

2009 · 1 incident

July 17, 2009 MT · Metal/Non-Metal outside foreman, leadman HANDTOOLS (NONPOWERED)
Knife River · Struck by... (Not Elsewhere Classified)

Using pry bar to push punch plate - plate slipped off bar hitting tip of finger.

2004 · 1 incident

March 30, 2004 MT · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Knife River · Struck by... (Not Elsewhere Classified)

EE WAS IN SCREEN, HE WAS BEING HANDED PIECES OF FLAT METAL. PIECE OF IRON CAUGHT HIM IN THE LEFT EYELID - 3 STITCHES - PROTECTIVE EYEWEAR WAS PROVIDED BUT NOT WORN.

2001 · 1 incident

June 18, 2001 MT · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Jtl Group Inc · Struck against stationary object

EMPLOYEE WAS TIGHTENING A BOLT AT THE CRUSHER, HE WAS WEARING LEATHER GLOVES (PPE) WRENCH SLIPPED, HIS HAND SLIPPED HITTING A PIECE OF METAL, WENT THROUGH THE GLOVE CUTTING 4TH FINGER ON RIGHT HAND.

2000 · 1 incident

September 19, 2000 MT · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Jtl Group Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS USING A WRENCH TO TIGHTEN A BOLT, WRENCH SLIPPED CUTTING INSIDE OF THE HAND.

1999 · 1 incident

November 29, 1999 MT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Jtl Group Inc · Caught in, under or between (Not Elsewhere Classified)

OPERATOR WAS ROLLING COUNTER WEIGHTS ON WASHPLANT FINGERS WERE PINCHED IN BETWEEN WEIGHTS CAUSING A CUT ON LEFT LITTLE FINGER REQURING STITCHES (5 STITCHES)

1993 · 1 incident

August 27, 1993 MT · Metal/Non-Metal superintendent HANDLING OF MATERIALS
Jtl Group Inc · Over-exertion in lifting objects

INJURED WAS HELPING INSTALL WEAR PART INT EH HORIZONTAL SHAFT IMPACT CRUSHER. WHILE LIFTING THE WEAR PARTS ITNO PLACE, HE STRAINED HIS LOWER BACK.