Portable Base Crusher has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Portable Base Crusher.
Fatalities
0
Total incidents
27
Years on record
1983–2005
Latest incident
Jul 2005
Compliance record
MSHA citations since 2000
22
citations
3
significant & substantial
$1,870
proposed penalties
$1,870
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
17
inspections on record
221
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 221 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Portable Base Crusher has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
22 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-09-27.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Superintendent was wrenching on an adjusting nut on the conveyor tail pulley. The wrench slipped causing his right hand to jam into the metal guard and lacerating the end of the middle finger. Xrays revealed a fracture in the end of the finger as well.
March 14, 2005MT · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
EE WAS WALKING NEAR STORED CONVEYORS IN STAGING AREA ON FLAT GROUND. FELT LEFT ANKLE "POP" AND FELL TO THE GROUND. ANKLE BECAME SORE, STIFF AND SLIGHTLY SWOLLEN.
2004 · 1 incident
October 22, 2004MT · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanMACHINERY
Laborer prepared a piece of angle iron to cut with cutting torch. As soon as he put heat to it a foreign object popped and hit his cheek under his safety glasses and the object fluid p in his right eye. shoulder had a face shield over his safety glasses or welding goggles.
2003 · 3 incidents
October 24, 2003MT · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
EMPLOYEES WERE CLEANING OFF EQUIPMENT TO MOVE, A ROCK FELL FROM A GUARD STRUCK THE EMPLOYEE IN THE MOUTH CHIPPING HIS TOOTH. THE EMPLOYEE SAW A DENTIST RECENTLY AND IT WAS DETERMINED HE WOULD REQUIRE A CROWN.
March 5, 2003MT · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techFALLING/SLIDING/ROLLING MATERIALS
EE WAS ADJUSTING TRAP BELT WHEN A FROZEN CHUNK FROM THE GRIZZLEY ROLLED DOWN THE BANK AND BUMPED THE BACK OF THE EE'S LEGS, CAUSING PAIN IN HIS BACK.
January 7, 2003MT · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EE HIT HIS EAR ON A PIECE OF IRON STICKING OUT THAT WAS HOLDING A MUDFLAP ON A CONVEYOR, CUTTING HIS LEFT EAR. RECEIVED STITCHES. AS THE NEW SAFETY DIRECTOR, WAS UNAWARE OF THIS SPECIFIC REQUI REMENT & WE ARE FILING THE 7000-1 TO ABATE THIS CITATION.
September 16, 1996MT · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorHANDLING OF MATERIALS
CHANGING THE SCREENS IN SCREENING PLANT ON SCREEN STARTED TO SLIP & EE CAUGHT IT BENDING HIM BACK WITH HIS ARMS OVERHEAD. EE COMPLAINS OF SORE BACK. AS THE NEW SAFETY DIRECTOR, WAS UNAWARE OF THIS SPECIFIC REQUIREMENT & WE ARE FILLING THE 7OOO-1 OUT NOW TO ABATE THE CITATION.
1994 · 1 incident
September 20, 1994MT · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanMACHINERY
ROCK BOUNCED OUT OF CONE STRIKING EMPLOYEE IN LOWER BACK. A TEMPORARY GUARD WAS IN PLACE, HOWEVER GUARD WAS NOT SUFFICIENT TO PROTECT EMPLOYEE.
1993 · 4 incidents
October 26, 1993MT · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorSTEPPING OR KNEELING ON OBJECT
EMPLOYEE WAS WORKING ON WELDER-CHANGING SPARK PLUGS & TIMING-HE REMOVED THE HOOD SO HE COULD GET TO PLUGS & GOVERNOR LINKAGE-HE TURNED THE WELDER ON WITH THE HOOD OFF AND REACHED IN TO THE LIN KABE TO ADJUST FAN BLADE ON WELDER CAUGHT HIS GLOVE PULLING HIS LEFT HAND INTO FAN.
February 25, 1993MT · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
DURING MAINTENANCE AND CLEAN UP EMPLOYEE WAS SHOVELING UNDER THE IMPACTOR. ANOTHER EMPLOYEE TOSSED A PIECE OF ANGLE IRON OFF THE IMPACTOR AND IT LANDED ON HIS RIGHT FOOT.
1992 · 1 incident
January 13, 1992MT · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
HE WAS PUMPING HOT TAR FROM A SEMI TO A TANKER, THEY WENT TO TIGHTEN A LOOSE CONNECTION AND THE CONNECTION CAME LOOSE AND THE HOT TAR HIT HIS HAND.
March 21, 1983MT · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
FELL DOWN STAIRS IN POWER VAN, THEN MISSTEPPED AND FELL OFF OF A CONVEYOR TRAILER INTO SOME SOFT MATERIAL.
January 25, 1983MT · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
PULLED SHOULDER MUSCLE, WHEN HE SLIPPED AND FELL, WHILE WORKING ON CONVEYOR.
For insurers, brokers, and safety consultants
The full compliance file on Portable Base Crusher
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.