Mining Incidents

CalMat Co: 3 recorded fatalities operator

Controlled by Vulcan Materials Company
MSHA operator ID: L16645

Watch this operator

Email me when a new MSHA incident is filed at any CalMat Co mine.

Fatalities
3
Total incidents
559
Mines on record
46
Years on record
1999–2026
Compliance record
MSHA citations since 2000
1,812
citations
299
significant & substantial
$574,179
proposed penalties
$481,940
paid to date
84% of proposed penalties paid to date, a $92,239 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
1,691
inspections on record
31,164
inspection hours
5.8
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
1,812 citations across 31,164 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$574K
proposed penalties
$482K
current assessed
$482K
paid to date
$302
outstanding
1,783 assessments are final orders; 49 contested dockets.
Of $269K in penalties contested before the Commission, $164K was upheld in final decisions.
As of the most recent assessment on 2026-06-23.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.6%
significant & substantial
3.4%
high negligence or reckless
16.6%
reasonably likely or greater
43.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.2% none, 19.8% low, 76.6% moderate, 3.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.73
total case rate
0.15
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
Year total case rate days-away fatal
2026 1.16 0.29 0.000
2025 0.73 0.15 0.000
2024 1.54 0.42 0.000
2023 1.13 0.14 0.000
2022 0.98 0.42 0.000
2021 1.21 0.30 0.000
2020 0.88 0.44 0.000
2019 2.05 0.77 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-07-29
4%
of limit-tested samples over the exposure limit
541
samples
203
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz2059 over
  • Respirable dust, <.1mg291
  • Unlisted Particulate, respirable, <1% Qtz16
  • Nuisance dust, respirable, <1% Qtz5

Area samples (mill and shop air)

Last sampled: 2001-01-24, 25 years ago
2
samples
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
51 citations taken to the federal commission · 3% of citations on record
  • Settled 44 · 86%
  • Stood as issued 7 · 14%
61%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 36 decided S&S contests · industry: 79%
37%
Penalty reduction in decided contests
$250K proposed, $158K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2025-09-24. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2004-445M Settlement Melick 2005 $100K → $60K
CENT 2018-0277 Settlement Manning 2019 $69K → $35K
CENT 2018-0312 Settlement Manning 2019 $33K → $33K
WEST 2010-769M Settlement 2010 $13K → $8K
WEST 2010-1061M Settlement Manning 2011 $7K → $1K
WEST 2008-312M Settlement Bulluck 2009 $6K → $3K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2026
4
2025
5
2024
11
2023
11 (1f)
2022
12
2021
12
2020
9
2019
18
2018
12
2017
19
2016
10
2015
9
2014
13
2013
4
2012
5
2011
10
2010
11
2009
14
2008
28
2007
29
2006
27
2005
32
2004
24
2003
31 (1f)
2002
40
2001
43 (1f)
2000
49
1999
67

Mines on record

Fatalities under this operator

3 recorded
June 22, 2023 CA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer Fatality · MACHINERY
CalMat Co · Struck against a moving object

Machine operator was operating a CAT D9T dozer clearing overburden material from a bench. Operator reversed the machine backwards an estimated 200-300 ft. at a high speed without looking back and without responding to honking from another machine, per witness testimony. Machine fell off an edge. Operator was pronounced dead at the scene. Machine is total loss.

June 14, 2003 CA · Metal/Non-Metal mine manager, mine foreman, mine owner Fatality · MACHINERY
CalMat Co · Struck by falling object

THE VICTIM WAS POSITIONING THE WEDGE BAR AND BOLT ASSEMBLY TO SECURE THE UPPER PLATE IN A STATIONARY JAW CRUSHER. APPARENTLY THE LINER SHIFTED AND FELL, STRIKING THE VICTIM.

November 9, 2001 CA · Metal/Non-Metal beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider Fatality · OTHER
CalMat Co · Drowning

EMPLOYEE WAS USING A HIGH PRESSURE WATER HOSE TO WASH OUT ACCUMULATED MATERIAL BELOW CONVEYER #11 (FLOATING) AND TAILPULLEY CONVEYER #4 (LAND)APPARENTLY FELL IN WATER PIT WHILE NOT WEARING A LIFE JACKET.

For insurers, brokers, and safety consultants

Where CalMat Co stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us